Pro Armorer’s Toolkit

Built to cover the user that does it ALL; the armorer, the gunsmith, the range owner, the competition shooter, and firearms aficionados. Nearly every tool that FIS makes is packed into one indestructible waterproof Nanuk® hard case. This won’t fit in your pocket like our other kits, but is still go anywhere ready weighing in under 10lbs and measuring 13” wide x 11” tall x 6.5” deep. The organized selection covers all of your general needs in bits, cleaning tools, and punches. No platform or accessory are overlooked with specialized tools for AR’s, battery doors, Glock®, Sig Sauer®, & Shotguns. Torque tools are available in options of both All-In-One Drivers (All-In-One Torque Driver 15-65 inLbs & Mini All-In-One Torque Driver 6-25 in-Lbs) or a curated selection of Individual Torque Limiters (10, 15, 20, 25, 30, 35, 45, 55, 60, 65, 80 in-Lbs). The Pro Armorer’s Toolkit is the ultimate on-the-go gunsmithing resource.

Each Pro Armorer's Toolkit also includes:

• Ratchet T-Handle w/Locking Hex Drive
• Extension/punch holder
• 1/2” Socket/Adapter
• Shotgun Choke Wrench
• 1911 Bushing Wrench
• Spring Tool
• E2 Slide Punch
• Grip Screw Bit
• Sight tool for Glock®
• Mag Tool for Glock®
• Channel Remover for Glock®
• Channel Installer for Glock®
• Brass Hammer Head
• Bolt Group Scrapers (.223, .308)
• Castle Nut Wrench
• A2 Sight Adjuster
• Extractor Tool (.223, .308)
• Pivot Pin Tools (AR10, AR15)
• Bolt Catch Pin Punch
  (With Nylon Surface Protector)
• Non-marring Plastic Pin Punch
• Remington® 700 Bolt Opener
• Steel Pick
• Mini Pry Bar
• Bronze Scraper
• Set of two 8-32 adapters
• 3 Cleaning Brushes (Nylon Medium and Hard Bristle & Bronze Hard Bristle)
• Aimpoint® Bit
• Battery Cap Tool Coin Slot Battery Cap Tool
• 3/8” Adjustment Wrench
• Scope Jack
• Machined Aluminum Bubble Level Set Magnetic level & rail clamp level/anti-cant device with precise UK-sourced bubble vials
• Cleaning Rod/Bore Obstruction Kit
  • Six precision machined stainless steel rods (8-32 thread)
  • Six .22 caliber brass bore adapters
  • Six .30 caliber brass bore adapters
  • Six 6.5 Creedmoor caliber brass bore adapters
  •.22 caliber obstruction tip
  •.30 caliber obstruction tip
  • 6.5 Creedmoor caliber obstruction tip
  • Double ball bearing drive adapter
  • Small Parts Holder
  • Carrying Case
• Magnetic Tray
• Bench Block
• Large Parts Holder
• 4 Medium Parts Holders
• Steel Pin Punch set (1/16, 3/32, 1/8, 5/32, 3/16, 1/4)
• Brass Pin Punch Set (1/16, 3/32, 1/8, 5/32, 3/16, 1/4)
• Roll Pin Punch Set (1/16, 3/32, 1/8, 5/32, 3/16, 1/4)
• Roll Pin Starter Punch Set (1/16, 3/32, 1/8, 5/32, 3/16, 1/4)
• 40 Electroless Nickel Plated Bits (1” in length):
  Hex: 2x 0.050”, 2x 1/16”, 2x 5/64”,, 7/64”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 2x 1.5mm, 2x 2mm, 2x 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm
  Screwdriver: 2x PH0, PH1, PH2, 2x 3/32”, 3/16, 1/4
  Torx: 2x T6, T8, T10, T15, T20, T25, T27, T30
• 24 Electroless Nickel Plated Bits (2” in length):
  Hex: 5/64”, 3/32”, 7/64”, 1/8”, 5/32”, 3/16”, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm Screwdriver: PH1, PH2, PH3, 4mm, 5mm, 6mm
  Torx: T10, T15, T20, T25, T27, T30
• 6 Extended Action Bits (4” in length):
  Hex: 5/64”, 1/8”, 5/32”, 5mm
  Torx: T30
• Nanuk™ 905 Waterproof Case w/ laser cut foam insert organizers
  • Waterproof (IPX7) • Dust proof (IP6X) • MIL-SPEC certified
  
  

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.